Submersible sewage pump is a machine driven by water pressure, which is used to suck the accumulated water in the sewer. This water pump has a strong drainage capacity and can effectively discharge the sludge and debris in the pipe. It can also be used to remove garbage from the sewer.
Working principle of submersible sewage pump:
1. When water flows to the water pump, it will pump water out of the sewer.
2. Then a pressure difference is generated through the water pump to pump the sewage up from the sewer.
3. Finally, it flows away from the drain.
Usage and precautions:
Before use, you should first measure whether the water output meets the requirements.
01
If there is a water leak in the water inlet pipe or other places, you should contact the maintenance personnel in time for repair.
02
During use, pay attention to observe whether the water inlet flow is stable.
03
Check the water pump shaft force device regularly to ensure its normal operation.
04
Common faults and their solutions:
Common faults include overflow pipe blockage, bearing wear, loose rotating parts and other problems.
