Submersible Agitator Mixer

The Submersible Agitator Mixer is a high-efficiency submersible mixing device suitable for water treatment, wastewater treatment, and industrial liquid mixing applications.

For example:
SM400.740-M8/1.5D-S/S

SM - Series code
400 - Impeller diameter (mm)
740 - Impeller speed (rpm)
M - Motor configuration
8 - Motor pole number
1.5 - Motor power (kW)
D - Direct-drive connection
S - Mixer material: G = HT200; S = 0Cr19Ni9; T = 022Cr17Ni12Mo2
S - Mounting system material: C = Carbon Steel; S = 0Cr19Ni9; T = 022Cr17Ni12Mo2

High-Efficiency Mixing Performance

The impeller features a hydrodynamically optimized design, enabling water circulation velocities of 1.2–1.5 m/s driven by a 3φ 380V 50Hz motor.

Corrosion and Wear Resistance

Made of 304/316 stainless steel or fiberglass, suitable for liquid environments with pH 5–9, the impeller is wear-resistant.

Deep Water Submersion Capability

Supports a maximum submersion depth of 20 meters, with IP68 protection rating. It can operate continuously without leakage in a fully submerged state, suitable for deep wells, grit chambers, and large reaction tanks.

Production Capacity: 15,000㎡ factory area, 5 production lines, annual output of 10,000 water pumps and 5,000 blowers.

Quality Assurance: ISO 9001 and CE/TUV certified, full-process quality control, 100% finished product qualification rate.

Technology R&D: 20 engineers and 10 technicians, 15 patents, supporting new product development and non-standard customization.

Supply Chain and Inventory: 50+ long-term suppliers, key components manufactured in-house, common raw material inventory ≥3 months of production.

After-sales Service: Provides 24-hour technical response, 72-hour on-site service, and long-term maintenance support.